Date:         Tue, 12 Jun 2012 13:53:13 -0700
Reply-To:     Jonathan Stone <bluehighwayvanagon@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jonathan Stone <bluehighwayvanagon@GMAIL.COM>
Subject:      Re: Question re water tank cap
Comments: To: Scott Chapman <scott@mischko.com>
In-Reply-To:  <CA+R6tEJwL9Y+MUv=EA3qCDkrDyUiG+0Fws-1NYB3ApOrX+S6Ww@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Scott - I measured the protrusion of the flue, then made a guess about
where in the bowl the cut should be made to fit snugly over it.  A little
grinding and sanding was necessary to get it just right. I wanted the flat
end of the bowl to lay directly over the flue so tightening the bolt would
not unduly flex either surface.

Good luck!

Jonathan


> >
> http://bluehighwayvanagon.blogspot.com/2012/03/westfalia-improvements-part-ii.html
> >
> >
> Jonathan,
> How did you determine the right location to cut that bowl over the flue?
>