Sorry. Wiring in an LED is a bad idea. Shunting an LED directly into TVS circuit would cause the supplied 5 volts to be sent back to ECU all the time; it would take the TVS out of the equation. Maybe a relay could be used but I'll leave well enough alone. Neil. On Thu, Jun 21, 2012 at 3:35 PM, neil n <musomuso@gmail.com> wrote:
> .... Maybe the slight play I feel in the TB shaft is enough to cause an > issue at throttle valve switch. But this switch closes every time, engine > off, throttle moved by hand. I may wire in an LED and watch it while > driving. A real world test! > > Neil. > > > -- Neil n 65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp '88 Slate Blue Westy to be named. '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ Vanagon VAG Gas I4/VR Swap Google Group: http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.