And do it every two years! Here is what I use, it makes it much easier: www.motiveproducts.com I have adapters for all my cars. Stuart -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Mike S Sent: Tuesday, June 19, 2012 4:58 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: source for rebuilt ATE calipers? On 6/19/2012 7:45 PM, Jason wrote: > Flush your brake fluid guys! Out of both ports. There's the top, bleeder port, and one on the bottom, where water would tend to collect. If you only flush out the top one, you won't replace all your fluid. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.