In a pinch I have used the 130B version after a little trimming at both ends, but the result was not something I wanted to leave in forever. There is another longer wbx hose that has a section in the middle that nearly exactly matches the 130A version "S" hose you need. You could buy one of those and cut the S hose section out of it. It is not a very expensive hose. hose# 251 121 058A Mark
Tom Rowsell wrote: > It seems this hose, from coolant tower to right front head is either NLA or > out of stock at most vendors. My '86 takes the A version...I don't think > the B would work or fit too well. The common NAPA cross reference list > that's floating around lists an alternative for the B version only. > ...just wondering if anyone's tackled this lately ? > > Thanks > Tom > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.