---------- Forwarded message ---------- From: John Bange <jbange@gmail.com> Date: Tue, Jun 26, 2012 at 10:40 AM Subject: Re: Steel fuel line adapter & curtain springs To: Kim Brennan <kimbrennan@mac.com>
The only product he sells that completely baffles me is the "scoop" type transmission pan cooler. With the heat exchanger in place, all he's doing is pulling the engine coolant temp down. If he wants to do that, he might as well install a lower temp thermostat and have the radiator do the work rather than adding another source of drag. The cooling system has plenty of cooling capacity. And what's he doing to push his transmission up to 240 degrees? Mine rarely tops 210 unless I'm dragging a half ton of materials up a hill in 100 degree temps.
On Tue, Jun 26, 2012 at 10:09 AM, Kim Brennan <kimbrennan@mac.com> wrote: > Personalities aside, his stuff is ok. > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.