I wonder too Dennis. I know that having that stock diesel noise reduction under engine cover installed in my I4 gasser did raise the oil temps a bit. I can only see how it goes with the tranny. I'll use a IR temp gun and do a couple of hwy runs with and without cover. But I do like having the trans. protected a bit more, especially the access cover for the reverse/G gear idlers. alistair On 2012-06-24, at 9:50 PM, Dennis Haynes wrote: > I wonder if the change in air flow will have an effect on transmission or > the front exhaust pipe cooling. It does look good. > > Dennis > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Alistair Bell > Sent: Sunday, June 24, 2012 9:48 PM > To: vanagon@GERRY.VANAGON.COM > Subject: syncro transmission bash plate project finished > > I surprised myself in getting this project finished today. Plate cut out and > installed. > > http://shufti.wordpress.com/2012/06/24/vanagon-syncro-bash-plate-project-fin > ished/ > > alistair > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.