Date:         Fri, 22 Jun 2012 09:40:23 -0300
Reply-To:     Tom Rowsell <86westy@GEOEXPLOITS.ORG>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tom Rowsell <86westy@GEOEXPLOITS.ORG>
Subject:      Re: 251-121-130A coolant hose source ?
Comments: To: Scott Daniel - Turbovans <scottdaniel@turbovans.com>
In-Reply-To:  <4FE38B9E.7060301@turbovans.com>
Content-Type: text/plain; charset=ISO-8859-1

It looks like it changed from A to B sometime in the '86 model
year...Mine's definitely the A version. Ken from Vanagain to the rescue. He
had one in stock. I see sort of a cutout in the firewall, where the coolant
tower can be located a couple of inches to the right of where mine is. That
would make sense for the B version as it seems to have 2 90 degree bends,
where the A version has 2 60 degree bends. The idea being that the offset
between the Head and the tower is greater for the B version. Mine is now
patched with silicone X-treme Tape <http://x-tremetape.com> awaiting the
new hose  :)

Tom

On Thu, Jun 21, 2012 at 6:01 PM, Scott Daniel - Turbovans <
scottdaniel@turbovans.com> wrote:

>  The B version can work in an 86 I believe.
> I used a new hose I got from my FLAPS  - by matching hoses.
>
> On 6/21/2012 6:57 AM, Tom Rowsell wrote:
>
> It seems this hose, from coolant tower to right front head is either NLA or
> out of stock at most vendors. My '86 takes the A version...I don't think
> the B would work or fit too well. The common NAPA cross reference list
> that's floating around lists an alternative for the B version only.
> ...just wondering if anyone's tackled this lately ?
>
> Thanks
> Tom
>
>
>