Date:         Wed, 27 Jun 2012 08:14:55 -0700
Reply-To:     HotelWestfalia <zolo@FOXINTERNET.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         HotelWestfalia <zolo@FOXINTERNET.NET>
Subject:      Re: Voltage stabilizer installation?
Comments: To: Jeff Palmer <Jpalmer@MYMTS.NET>
In-Reply-To:  <BLU0-SMTP189550AE13B0F8E57D4AD79B8E70@phx.gbl>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

Buy one,
take the instruments out,
Look on the back of it,
find the item,
get a philips screw driver,
take out the old one,
put the new one in.
done.

Some of the faulty readings are attributed to the poor ground wire
connection of the multiple connector, that needs to be renewed.  Brown wire.

Zoltan


----- Original Message -----
From: "Jeff Palmer" <Jpalmer@MYMTS.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, June 26, 2012 9:51 PM
Subject: Voltage stabilizer installation?


Hi everyone,

85 Westfalia GL with temp and gas gauges reading low.  Thought I'd try
replacing the voltage stabilizer (part number 357 919 803 from Bus Depot.
Unfortunately I can't find my Bentley for the life of me.  It's in one of
twenty boxes waiting to be unpacked in the basement.  Can anyone help me out
with some installation instructions?  I'm lousy with German :)

Thanks in advance
Jeff