There are a number of places where a wire or connection can fail causing a single speed to not work. There are connections that can burn out and cause a problem. You gotta get the wiring diagram and wring it out. Dennis
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Finn Runyon Sent: Friday, June 29, 2012 5:50 PM To: vanagon@GERRY.VANAGON.COM Subject: AC Blower Speed Thanks Ken for sharing your wisdom on this problem. As it turns out both my 87 and 89 Westy's have fan speeds 1,2&4, but do not have the most useful #3 speed. Switching relays did not get #3 so I believe it may be one of the resistors that Dennis spoke of. Any further advice is most welcome. Finn Runyon 87 Westy Pooh 89 Westy Roo |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.