Okay, getting to the last of the issues, I hope. Of course, the little circuit breaker was broken off, and when I started working on the boxes I bumped the big ground wire (the 6 guage green one that grounds the box to the chassis) and found that the chassis end had rotted away. Not good. You might want to check that on your rig so it doesn't become a 120v "live wire".
So, I'm replacing that wire, but I'm wondering if I should just put in a GFCI outlet on top and feed the others from it.
Anyone done this?
Stuart '85 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.