Date:         Sun, 8 Jul 2012 07:05:15 -0700
Reply-To:     Aaron <a.robinson.lists@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Aaron <a.robinson.lists@GMAIL.COM>
Subject:      Jumpseat install questions
Content-Type: text/plain; charset=us-ascii

I'm installing a jumpseat into an '87 westy and was wondering of anyone had any tips. I looked inside a carat with factory installed seats. It has a bracket welded in on the isle side and I'm not sure what I will find behind the fuel expansion tank in the wheel well.

I'm planning on using some large washers behind the back side unless anyone suggests differently. I did cut the plates for the seat posts out of the floor and plan on getting those welded in.

If anyone wants  to share their their experience, I'd love to hear it.

Thanks!
Aaron

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.