Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2012, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 20 Jul 2012 06:44:05 -0500
Reply-To:     Jarrett Kupcinski <kupcinski@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jarrett Kupcinski <kupcinski@GMAIL.COM>
Subject:      Bostig Installation (so far) Report
Content-Type: text/plain; charset=us-ascii

I awoke this morning at 4:00 am, likely due to the fact that the remainder of the Bostig engine conversion kit is scheduled to arrive later today. I'll admit it. I'm anxious. I don't just want the parts, I don't just want them in the van and running. I want to be in the Rocky Mountains, my top popped, cool beverage in hand, listening to the wind blow through whatever few ponderosas the pine beetles haven't yet ravaged, knowing that I climbed that last hill at 70 miles per hour in fourth gear, with power to spare.

The real problem here is that the kit is arriving on my doorstep two weeks late. That wouldn't be a problem except that, well, it's a problem. When I considered doing the conversion, one of my original questions was their estimate of the likelihood that a delay could happen. I was told that a delay could happen, but wasn't likely. A few days, tops. Well, it happened. The kit was supposed to ship on the 28th of June. It Shipped on the 13th of July, nearly 3 weeks late.

I should be clear that I'm not mad at Bostig. It's just that I made a whole set of plans based on the idea that I would have the parts sometime during the first two weeks of July, not the end of the third week. As a result, I'm going to miss my 20-year high school reunion (that's tomorrow) and my vacation time, flexible though it might be, is slowly being eaten up.

So I'm stuck here, waiting for parts to arrive, hoping that the boys from Boston got my order packed and shipped correctly, that UPS doesn't eff-up the delivery, AND that it all fits together in the van without a hitch. Yes, I choose to be optimistic.

But enough about me, what about the engine?

I am really excited. I found a low-mileage (29,000) at a nearby salvage yard in Lockhart, and though I paid too much for it, I got to pick it myself and pick a few brackets and off of other Zetecs they had lying around. Also, I didn't have to mess with deliveries, and learned first hand that I would need a cherry picker to just get the thing out of the van. I'm sure there are strong, resourceful folks out there who could get by without an engine hoist. I am weak, and decided that my back (and bank account) would be far happier if I spent $250 on a hoist rather than $500 or more on chiropractic bills.

I prepped that engine to the extent that I could, including swapping out the white dongle for the purple one for the fuel injection electronics. I also got SK-A from Bostig ahead of the rest of the kit, so the adapter and clutch are also now installed. All of that happened in textbook fashion, although I wondered how many other textbooks require slicing a chunk of engine off the block.

Extracting the wasserboxer and its various lifelines has so far been the toughest task (aside from the waiting). I've never fully dropped a WBX from a van before, and if you thought it'll be just like an air cooled with a few more hoses, well, you'd be wrong. It's heavier, bulkier, and infinitely more messy. I know I never put that much coolant in. When it finally came free I danced triumphantly, like I imagine my paleolithic forefathers might have, upon pulling the moist warm heart from a wooly mammoth.

That being said, there is a part of me that grew nostalgic as I was removing bits and pieces from the engine. It IS like an old air cooled engine in that it is very German. Which is to say that I know it like I might know appendages that are actually attached to me. Which twists the simile of the previous paragraph very strangely.

In any case, the WBX is out, cleaved from the transmission, and now sitting desolately in the corner. Meanwhile, the Zetec is slouching next to the van, cooly waiting for the arrival of parts, parts, parts. And Olly's engine bay is clean and ready.

My spies tell me that the shipment went "Out For Delivery" at 6:03 this morning. I'll try to not squeal like a schoolgirl when the UPS guy arrives.

-Jarrett 89 Westy


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.