At 08:36 PM 7/27/2012, neil n wrote: >The dark brown spots are where harness was cable strapped beneath the >air cleaner bracket. Sure looks like a burn, but I suspect it's really interaction between the harness cover and the grommets. If it were hot wires the damage would be worse on the inside. Yrs, d ps - speaking of P/S pressure switches, you might want to fuse the red B+ lead from the terminal post inside the wiring box that feeds the relay box. Doing that would have saved my harness when something happened to that wire on mine. I never determined precisely what happened, but it was clear that that particular wire got extremely hot (along with the wiring in the relay box and the relay box cover and the said B+ lead.). I've found 7.5A sufficient, perhaps even 5A. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.