if you are sure all fasteners are undone, it would appear it is stuck in the bell housing.. from either ..one would think .. stuck where the two main mounting bolts are, or in the starter bushing, assuming it's a manual trans. I havn't seen one do that ..but that could make it harder to get the starter out for sure. scott www.turbovans.com On 8/3/2012 2:27 PM, David Bjorkman wrote: > Hi Volks; > The starter in my parts bus (84.5 WBX) is giving me a hard time about > coming out for a rebuild. I removed the 2 bolts and the 2 wires and > it won't budge. Am I missing something or do I just need to give it a > few good whacks (what I am currently doing with the bus that's running > to make the starter operate). > Dave B. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.