Date:         Mon, 6 Aug 2012 20:25:27 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: How to remove wires from headlight switch plug?
Comments: To: greentabe-vanagon@yahoo.com
In-Reply-To:  <1344297450.10102.YahooMailClassic@web29802.mail.ird.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1

A quick and dirty look at remnants of an old harness, and I think I
see the plug you refer to.

Yours very likely has female push-on type connectors similar to this:

http://www.turbomr2.com/MR2/HowTo/Engine_Fans/Tripac_Fan/Images/Relay_Connectors_8212.JPG

It's that raised tab that's stopping you. When raised, that tab bumps
up against a step which keeps the connector from pulling out of the
block. This type of connector is used all over the Vanagon.

Here's what I do:

- gently push the wire into the block, depress that little tab, keep
it depressed while gently pulling wire out.

I use either a straightened paper clip, or my smallest jewelers
screwdriver, to depress that little tab.

Neil.

On Mon, Aug 6, 2012 at 4:57 PM, Tabe Johnson
<greentabe-vanagon@yahoo.com> wrote:
> I need to pull the two big wires (switched hot and headlight) out of the back of the connector that plugs into the headlight switch.  I have poked and prodded but can't get the wires out of the connector.  Anyone know what the trick is?
>
>
>
> Thanks!
>
> tabe_johnson/90MV



--
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines