Date:         Sat, 11 Aug 2012 19:43:49 -0400
Reply-To:     Edward Maglott <emaglott3@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Edward Maglott <emaglott3@GMAIL.COM>
Subject:      Burnt Ignition cable end stuck in dist. Cap
Content-Type: text/plain; charset="us-ascii"; format=flowed

Van started running rough today, at idle mostly.  Got home and took a
look.  Obvious problem, the wire from the coil to distributor was
bent off at an angle with burn marks all over the place.  just
touched it and it came apart.  Now I've got the burnt up end stuck
down in the center pole of the distributor.  Nothing to grab onto and
everything is pretty brittle from the heat it has been exposed
to.  I'm thinking dremel is my next move, but anybody have any better ideas?
Edward

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.