At 08:46 PM 8/21/2012, Dennis Haynes wrote: >The idle speed stabilizer shares some of the ECU inputs such as temp 2 and >of course the tach signal. This along with the pulsing of the idle valve >puts noise on some of the circuits. With two devices sharing the temp 2 >circuit a good ground path is really critical. Un plug the idle controller >and watch some of those readings change. Thanks, Dennis, I'll check it out. Yrs, d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.