Hi DM&FS, > foam blocks are pretty worthless. The cheap rope that comes with those kits > doesn't hold a knot very well and unless you use cam straps for the bow and > stern tie downs, yu're really risking it. Imagine a 70 pound canoe blowing True: some ropes are better than others. Also true: installing a rack does not equal proper tie down. The devil is in the details. Don't buy into the expression: if you can't tie knots, tie lots. Learn to tie knots and keep it simple. Tie the lines with independent, secure knots so that if one line loosens, the others stay tight. Tie the bow and the stern, as well as thwarts or seats to prevent lateral movements. Ropes over the canoe are essential because you don't want to trust that seats and thwarts will not be torn out of the canoe. Ensure you have at least one forward facing tie down and one rear facing tie down. (Fore and aft springs.) Personally, I use cam straps, good quality climbing lines (4 to 6mm), as well as 1" webbing. g |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.