Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2012, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 20 Aug 2012 21:46:50 -0700
Reply-To:     Don Hanson <dhanson928@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Don Hanson <dhanson928@GMAIL.COM>
Subject:      Re: So my stepson asks . . .
Comments: To: Scott Daniel - Turbovans <scottdaniel@turbovans.com>
In-Reply-To:  <5033087A.7090300@turbovans.com>
Content-Type: text/plain; charset=ISO-8859-1

On Mon, Aug 20, 2012 at 9:03 PM, Scott Daniel - Turbovans < scottdaniel@turbovans.com> wrote:

> The limiting factor on the 2.1 is rod bearings .. > or stretch rod bolts that don't perform right anymore... > eventually oil pressure gets lowish. > > the 1.9 is a shorter stroke, smoother engine .. > that does not use stretch rod bolts as I understand it. > Rebuilders he told me they use 1.9 rod bolts in 2.1 rebuilds, fwiw. > > I think doing the heads about every 80K miles is about right. > I get very nervous when heads have been on for a long, long time, like > 15 to 20 years and 150+ K miles... > due to corrosion build up. > > 1.9's can do up to 250K like Chris says.. > 180K miles on them is common. > and ..same thing on the heads .. > about every 80K miles in my opinion. >

I defer to Scott's numbers...he has seen em in person probably by the hundreds.... Chris Tencent? I take his statements with a large grain of salt....After all, he SELLS rebuilt WBX motors...Why would he say anything other than 'how durable these motors are...if....." He certainly wouldn't get many customers for his $8K rebuilds if they were average WBX motors...or if his customer base had read all the stories I read when I was considering whether to get a van as my primary work vehicle and something to commute to Baja and back each year in... I am certain a well built and well maintained WBX could probably be very long lived....but sadly, most people tend to trash their vehicles and not take great care of them....and the WBX motor responds poorly to abuse, it seems... Now an old Valiant slant-six or a VW inline or a Honda, a Datsun or a Toyota...they'd probably go 100 miles uphill on no oil and do fine if you put a quart in.... for another couple hundred thou... 350 Chevy is in there, too, as nearly bullet proof... You can have a 'robust' motor and walk past a puddle of antifreeze or a few spots of oil, like every busy mom does or teenager who just wants to get to the Mall often will do...., and nothing bad will happen, at least not for a while...A WBX motor in that shape? You better get right to fixin'..... or soon you will have BIG problems.....


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.