---- Edward Maglott <emaglott3@GMAIL.COM> wrote: > I stick the wheel on so it's center opening is on the hub, then rotate it > and the hub until a wheel hole lines up with a hub hole on the right side. > (I'm right handed.) Then I just hold wheel with one hand, you don't have > to hold it up, the hub is carrying the weight. Once you get that one bolt > in, rotate wheel so that hole is at the top. Then all the other holes are > pretty much lined up. It's pretty easy. Not for all of us. I struggle, as clearly others have or they would not have found all the contortions they use. And not all us old codgers can contort so easily any more, despite regular workouts. > > Edward -- David McNeely |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.