On 8/28/2012 1:28 PM, Rocket J Squirrel wrote: > You must have a smaller center hole in your rims than I. Here, when the > rim is hanging from the hub, all the holes in the rim sit below their > corresponding holes in the wheel. It's not too hard to just swing/rotate the wheel and get a bolt hole lined up. The wheel isn't centered at that point, but after you get the first bolt in, it's easier to do so. Think of it the other way - remove 4 bolts, loosen the last, and let the wheel flop so it hits the hub. That - in reverse. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.