http://community.craftsman.com/Craftsman-4-pc-Metric-Flare-Nut-Wrench-Set-reviews HF’s cheapie set does not have the 14mm.
HF’s double flaring tool works fine if you do have to fabricate a new brake line!
Let us know what you find, but to be objective have a friend test drive it now and after and ask if he/she sees any difference.
Stuart
From: J Stewart [mailto:fonman4277@comcast.net]
Sent: Friday, September 07, 2012 8:32 AM
To: Stuart MacMillan
Cc: vanagon@GERRY.VANAGON.COM
Subject: Re: Interesting Thing About My Brakes....
I forgot to mention, last week I ordered the stainless steel front brake lines, I'll see if that makes a difference too. Jeff
Jeff Stewart
_____
I don't think Vanagon brakes are nearly as firm as modern cars to begin with. You've probably had the rears self adjust so there is less pedal travel, or perhaps a bubble worked its way out of the master. I just did a complete brake job including rebuild calipers and new hoses all around and they still feel softer than I'd like. I found these brakes difficult to bleed, even with my Motive Products pressure bleeder. I needed to do it twice a day apart.
Stuart
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of J Stewart
Sent: Friday, September 07, 2012 7:43 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Interesting Thing About My Brakes....
I've had my '85 Westy a little over two years now, and when I first bought it the brake pedal went all the way to the floor. I did a complete brake job including fluid flush, and the pedal got a lot better, but never as firm as I'd like it to be (and not like my other Westys) Since I have a company vehicle the Westy gets weekend use only. Well, do to a labor dispute at work, the company vehicles are now parked at my office, and I have to drive 60 miles round trip every day to/from my office. Since the Westy is now getting daily use, the pedal has gotten a lot firmer. What does this mean? I'd always assumed a new master cylinder was not far off in the future... Jeff
Jeff Stewart