You can easily and cheaply make your own. Just buy a hand bicycle pump from Walmart with a gauge on it. Be sure it has the adapter needed to blow up air mattresses. Now use this adapter with a short piece of hose to the nipple on your pressure cap. Pump up the coolant system to 14 psi for the test. The cap has a check valve in it that should allow you to pump up the pressure. If it won't hold any pressure then replace the cap with a new "blau" brand one. Other brands are junk even when new. Now you have a pressure tester for probably $10 or less. Have fun. Ken Wilford John 3:16 www.vanagain.com On Sep 7, 2012 2:35 PM, "Travis Newhouse" <travisnewhouse@gmail.com> wrote: > Hi. Does anyone in the San Diego area have a coolant pressure tank or > pressure cap adapters to use with a pressure tester? I'd be happy to > rent them from someone for a couple days. Please let me know. > > Thanks, > Travis Newhouse > Encinitas, CA > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.