Date: Mon, 10 Sep 2012 12:33:20 -0500
Reply-To: mcneely4@COX.NET
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Dave Mcneely <mcneely4@COX.NET>
Subject: Re: Propane tank fill valve
In-Reply-To: <CABToOYL-S05ju_yG2UBS9jYMDqWv025JWUhSN6AfEbw2eSyjjA@mail.gmail.com>
Content-Type: text/plain; charset=utf-8
there are kits available for what you want to do, in case you are uncertain about the proper fittings to use. And from all reports they do work. I believe that either Bus Depot or Van Cafe has them. One of them does at least, and calls the kit "Extend A Stay." mcneely
---- Edward Maglott <emaglott3@GMAIL.COM> wrote:
> I have the regular manual bleeder valve and separate fill valve. I have
> long been looking for a way to hook up a disposable tank to the fill valve
> in the situation that my tank goes empty at a remote location or
> campground. So I found a good deal on the connector and valve that would
> go on the end of the fill hose at a propane filling station. Now I'm
> wondering if I made the appropriate fittings to connect the disposable tank
> to that, would the pressure in the tank be enough to open the fill valve on
> the van's tank? At the filling station they run that pump that pushes the
> propane into the tank. How much pressure is that?
>
> I'm not sure if it's legal in all US states to replace propane fittings on
> a RV tank, but you can buy the fittings.
>
> Edward
>
> On Mon, Sep 10, 2012 at 9:17 AM, Gabriel Hourtouat <ghourtouat@gmail.com>wrote:
>
> > Stuart,
> > Where did you get the parts? In Canada, there are "Rules" against us
> > doing our own work on gas systems and so it is difficult to source the
> > parts...is that also the case in the USA? I have tried a couple of
> > suppliers and the answer was the same: you are not allowed to do it so
> > I won't sell it to you.
> > Thanks,
> > Gabby
> >
> >
> > On Sat, Sep 8, 2012 at 10:51 PM, Stuart MacMillan <stuartmacm@gmail.com>
> > wrote:
> > > On my early auto stop fill valve (which never worked) the bleeder had to
> > be
> > > opened several turns to let it fill. Quantity of LPG in tank has no
> > effect.
> > > Replace that defective, non-working valve with a standard RV fill valve
> > and
> > > bleed valve, and replace the supply valve and regulator too (if you have
> > the
> > > square regulator). Total parts cost is about $130 with regulator. Just
> > did
> > > it on my '85.
> > >
> > > Stuart
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
> > Of
> > > Edward Maglott
> > > Sent: Saturday, September 08, 2012 4:53 PM
> > > To: vanagon@GERRY.VANAGON.COM
> > > Subject: Propane tank fill valve
> > >
> > > So, anybody have any idea how much pressure it takes to open the fill
> > valve
> > > to let the propane in? Would that pressure be less if the tank were
> > empty?
> > > Thanks,
> > > Edward
> >
--
David McNeely
|