Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2012, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 14 Sep 2012 16:17:55 -0700
Reply-To:     Old Volks Home <oldvolkshome@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Old Volks Home <oldvolkshome@GMAIL.COM>
Subject:      Re: Master Cylinder Reservoir Cap Vent: @ Electrical Connection?
Comments: To: mark drillock <mdrillock@cox.net>
In-Reply-To:  <50538A86.5040202@cox.net>
Content-Type: text/plain; charset=ISO-8859-1

Except 87 Commercial Panel (Canadian) Vanagons (that I personally know of), perhaps others?

The Fiche(s) and ETKA show both for 80-91 and make no distinctions, but I'll go with what Mark says, it makes sense.

Even my 1980 only dated Fiche shows both.

-- Jim Thompson 84 GL 1.9 "Gloria" 84 Westfalia 2.1 "Ole Putt" 72 411 Station Wagon "Pug" 75 914 1.8 "Nancy" Full Timing From March 1999 To January 2012 oldvolkshome@gmail.com http://www.oldvolkshome.com Find me on Facebook: http://www.facebook.com/people/Jim-Thompson/100000710343835 ***********************************

On Fri, Sep 14, 2012 at 12:50 PM, mark drillock <mdrillock@cox.net> wrote: > 80-84, plain cap with no fluid level switch. > > 85-91, cap with fluid switch, turn on dash brake warning light when low > > This difference combines with some other wiring differences. > > 80-84 brake pressure switches have 3 wires, to also trigger dash brake > warning light when pressures don't match > > 85-91 brake pressure switches have only 2 wires, just for the rear brake > lights > > Mark > > > > > Old Volks Home wrote: >> >> Some Vanagons have a fluid sensor built into the cap, which connects >> to the Brake Warning Light to indicate low fluid. But the >> installation of this cap is inconsistent as most Vanagons I've >> encountered have just the standard cap (trivia: standard cap is also >> used on 3/55-67 Buses, all 914s, lotsa early watercooled inline 4 >> models, etc.). Both my Vanagons and 914 just have the standard cap, >> no warning harness to be found. Just find a standard cap (211611351B, >> 191611349A or Porsche 477611361) and install it. You can bet the >> Porsche numbered cap is probably offered at a "Porsche" price, even >> though it's the same thing. >> >> >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.