Hi, I'm still in the process of putting a 2.1 where a 1.9 used to be in my 85 Westy Weekender and whilst in the process of interchanging various parts I realize that I don't have any thing to put into the threaded hole that the .9 bar oil switch would normally go into. The drawing on page 17.7 of the Bentley shows an adapter that the .9 switch goes into but doesn't identify it. Basically I need to know where to get one of those so I can screw an old pressure switch in to plug the hole. Or any other alternative ideas/remedies would be gratefully appreciated. I'm sure there's an obvious solution but it's fryday and a few barley sodas have been consumed. But I am working on getting it all put back together. TIA, Paul in Tracy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.