Date:         Sun, 16 Sep 2012 22:23:56 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: She's Home! (Was: '87 Vanagon turns and turns but won't start)
Comments: To: "Don Preston Jr." <dj@fokust.com>
In-Reply-To:  <A9B45DCF55BD490AAC41497721A5E336@ntdev.corp.microsoft.com>
Content-Type: text/plain; charset=ISO-8859-1

With the Westy cabinets out on my '88, noticed that the screw to frame
for all the "kitchen" DC negative wires was loose, cockeyed and
rusted. Then I noticed that the connector was corroded where wire
strands contact. Cut that off, found 6" of a #12 ground wire was
corroded.

While checking engine bay grounds, ended up replacing a ~ 1.25' ground
wire due to corrosion.

Neil.

On Sun, Sep 16, 2012 at 6:02 PM, Don Preston Jr. <dj@fokust.com> wrote:

> Yep, what I was thinking as well Dennis. Already changed out all the
> contaminated oil and she'll be hanging out in the driveway until I can give
> a complete walkthrough of the electrics. the added secondary battery wiring
> looks a bit dodgy already...
>
> -Don
>
>
> -----Original Message-----
> From: Dennis Haynes
> Sent: Sunday, September 16, 2012 11:38 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: She's Home! (Was: '87 Vanagon turns and turns but won't start)
>

> .... Corrosion  of the wires inside the
> insulation is now becoming a common problem. Wires can even test good with
> meters but may not be able to carry the current load.

--
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines