Date:         Tue, 18 Sep 2012 09:24:10 -0700
Reply-To:     neil n <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil n <musomuso@GMAIL.COM>
Subject:      Re: PIC. Under Cabinet Flooring: Westfalia OEM?
Comments: To: Frank Condelli <RAlanen@aol.com>
In-Reply-To:  <1D4BF373-F722-4B41-BDB8-6879A642082E@aol.com>
Content-Type: text/plain; charset=ISO-8859-1

Yah I had to wonder if the panel wasn't replaced it looks so good. Odd
for a former Alberta cum interior of BC vehicle.

Great tip. Wondered about plugs. Rear plug seems to open up to frame
cross piece but will double check.

So many choices and details to look at before buttoning that up. Like
do I keep utility connectors, prep before insulation  (Fluid Film)
etc.

Who knew?

For $12K I feel pretty lucky but it needed $ and sweat pretty much right away.

Neil.

On Tue, Sep 18, 2012 at 2:13 AM, Frank Condelli <RAlanen@aol.com> wrote:
>         YIKES, that's the first time I see NO rust in that area !  Remove those rubber plugs so any moisture that gets in there will drain out !  That must be one pristine Westy !  Lucky you !
>
>
> On 2012-09-17, at 8:08 PM, Automatic digest processor <LISTSERV@GERRY.VANAGON.COM> wrote:

>> Shamelessly posted image of area cleaned up a little. Looking good!
>>
>> https://lh4.googleusercontent.com/-zW2HH9O2Nvw/UFZh64JucJI/AAAAAAAAGGI/VSUqpqGjuek/s720/Daddy%2520Like%25201988%2520Westy%2520d-side%2520Int.%2520Rocker.jpg

--
Neil n

65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp

'88 Slate Blue Westy to be named.

'81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/

Vanagon VAG Gas I4/VR Swap Google Group:

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines