Hi all I know the bolt pattern for the vanagon and bay bus is 5x112. I want to know the center bore size required to fit over the hub and dust cap for the wheel as well. I did pickup a set of 5x112, 15" x 7" Wide ET 45 Wheels I also have a set of 16" Audi that are also 7" But only have 2. ET 35, Same 5x112 bolt pattern. But both sets will Not bolt on with out the centers being opened to accept the centers. Let me know. I know a shop that can do it cheaply enough but if I can at least tell them what I want I should be good to go. I will mount a tire on each rim and check body rub and other issues later. Thanks Jonce |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.