Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2012, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 23 Sep 2012 17:19:12 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: Alternator continuous-duty rating?
Comments: To: David Beierl <dbeierl@ATTGLOBAL.NET>
In-Reply-To:  <505f5478.c44ee00a.0ffb.ffffb878@mx.google.com>
Content-Type: text/plain; charset="us-ascii"

Get bit complicated but the limiting factor for an alternator is the internal resistance of the windings. Since it is really in series with everything if you have 90 amps with a drop of 12 volts you are dissipating 1,080 watts as heat. At 750 watts/HP you have 1.44 HP right there. For the alternator rpm it is the ratio of the circumference of the pulleys. You'd be surprised how fast that thing spins at 4000 engine rpm.

Dennis

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of David Beierl Sent: Sunday, September 23, 2012 2:27 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Alternator continuous-duty rating?

>Just some context - with 90 amps at 13.6 volts, assuming 85% efficiency >the alternator will be sucking down about two horsepower from the belt >and dissipating about 225 watts as heat.

Hmmm...Leece-Neville show this 90-A alternator using almost four horsepower at full output: http://www.prestolite.com/productinfo/alternators/8AR2112T/8AR2112T_curve.jp g

I guess 85% is a bit optimistic.

I've also been seeing alternators rated full output at 6,000 rpm, with max rpm of 6,500. Our alternator spins a lot faster than that - just measured the sheaves, and alternator runs twice engine rpm or a bit more.

And you're right, the big three-groove crank pulley is tapered, at least on the engine I just looked at (random 2.1l core). I've been looking at that thing for twenty years now...in the engine bay, mostly. Not that that's an excuse. <shakes head>

Yrs, d


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.