Date:         Sat, 29 Sep 2012 13:51:10 -0600
Reply-To:     ralph meyermann <ralphmeyermann@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         ralph meyermann <ralphmeyermann@GMAIL.COM>
Subject:      Re: 1982 Westfalia Diesel ( stock ) belts?
Comments: To: mark drillock <mdrillock@cox.net>
In-Reply-To:  <CAAj276xxkzZTNu+_9-EEDA2SefExr4Fvv5pnJXcaxM8DY8-LUg@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Have you seen the proper single belt set up? I love it!! I had an issue
with my alt and it burned up a belt and the multiple local flaps available
did not have belts that short,another reason I went with the single set up!

Velma 82diesel 1.6 na westy

On Sep 29, 2012 2:47 PM, "mark drillock" <mdrillock@cox.net> wrote:

I use a single spare stud for this. After I take out one of the three bolts
I hand thread the stud into the hole before removing the other two bolts.
This keeps the parts lined up while I replace the belts. When I have it
back together loosely I take the stud out and put in the last bolt. Then I
evenly tighten all 3 bolts around and around until tight.

Mark




ralph meyermann wrote:
>
> If keeping stock set up to make it easier you can get some studs to pu...