I use a single spare stud for this. After I take out one of the three bolts I hand thread the stud into the hole before removing the other two bolts. This keeps the parts lined up while I replace the belts. When I have it back together loosely I take the stud out and put in the last bolt. Then I evenly tighten all 3 bolts around and around until tight. Mark
ralph meyermann wrote: > If keeping stock set up to make it easier you can get some studs to put > into the water pump,its a pain trying to align up all the holes to bolt up! > > Velma 82diesel 1.6 na westy > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.