Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2012, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 4 Oct 2012 21:50:35 +0000
Reply-To:     Jamie Fitterer <fittdog8848@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jamie Fitterer <fittdog8848@HOTMAIL.COM>
Subject:      Re: Hazards not working properly 84 Westy
Comments: To: oldvolkshome@gmail.com
In-Reply-To:  <CAJOFYZndeBBan3SBr1nZdgWD2uiQLGrFvWcETxar6Ya2pTy7=w@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Thanks I will check that.

> Date: Wed, 3 Oct 2012 19:25:55 -0700 > Subject: Re: Hazards not working properly 84 Westy > From: oldvolkshome@gmail.com > To: fittdog8848@hotmail.com > CC: vanagon@gerry.vanagon.com > > Well, let's troubleshoot for a bit. > > * Do the Turn Signals work (of course w/Ignition ON)? If so, the > Flasher, which operates either one. If not, Flasher or the Fuse is > suspect. Can't remember which fuse position it is, but if it looks > ok, check to make sure the fuse ends and the tabs it contacts aren't > corroded/oxidized. If ok and the Flasher still doesn't work, it may > need replacing. > > * If the Turn Signals/Flasher is working, check to make sure the > plastic connector is securely fastened to the back of the Hazard > Switch and the connector terminals are clean. If this checks out OK, > then the switch may have to be replaced. > > VW 171 953 235 A - Fits 84-91 Vanagons171953235A: > > http://www.busdepot.com/171953235a > > -- > Jim Thompson > 84 GL 1.9 "Gloria" > 84 Westfalia 2.1 "Ole Putt" > 72 411 Station Wagon "Pug" > 75 914 1.8 "Nancy" > Full Timing From March 1999 To January 2012 > oldvolkshome@gmail.com > http://www.oldvolkshome.com > Find me on Facebook: > http://www.facebook.com/people/Jim-Thompson/100000710343835 > *********************************** > > On Wed, Oct 3, 2012 at 3:08 PM, Jamie Fitterer <fittdog8848@hotmail.com> wrote: > > Hey everyone, > > > > > > When I push int eh Hazard light it stays solid lit no blinky? What could cause this? ALways have worked before. > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.