Date:         Fri, 5 Oct 2012 16:29:46 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: Need oil ring for 2.1 standard bore
Comments: To: Jim Felder <jim.felder@GMAIL.COM>
In-Reply-To:  <CAFnDXk3PAPFSnoCvG6CMXAqEYSJxyFZVvH7KS9ktEX-ta_5aYw@mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"

I done enough to know the three piece rings can get hung up regardless of
the type of compressor used. I have also taken engines a part that were
actually running with a folded over ring. Scores the cylinders really nice.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Jim Felder
Sent: Friday, October 05, 2012 9:39 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Need oil ring for 2.1 standard bore

That is exactly what happened, but the compressor I was using didn't help.
I was using the "aircooled style" wraparound that is very short to hit the
rings only, just a bit more, and it has a wavy pattern, which is most of the
problem. I should have been using the long, smooth spring steel coil that
you ratchet onto the piston. That would not allow the various openings of
the waterboxer piston to get caught. And yes, it had the three piece oil
rings.

Jim

On Fri, Oct 5, 2012 at 7:55 AM, Dennis Haynes
<d23haynes57@hotmail.com>wrote:

> And the piston needs to be pushed in from the top! Especially if you
> have the three piece oil rings. Otherwiese they get caught up in the
> notches for the pin to clear.
>
> Dennis
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On
> Behalf Of Jim Felder
> Sent: Friday, October 05, 2012 8:29 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Need oil ring for 2.1 standard bore
>
> Got the hesitant piston out of my 2.1 yesterday. Putting the piston
> back in, I broke the oil ring. Does anyone have just the oil ring, or
> a single piston set? Piston diameter is 93.98.
>
> Thanks,
>
> Jim (who will use the right ring compressor next time)
>
>