Date:         Tue, 2 Oct 2012 19:58:07 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: How to fix a leaking banjo fitting
Comments: To: James Felder <jim.felder@GMAIL.COM>
In-Reply-To:  <71BCCE74-2EF1-4A67-BA58-2066CDE6A67E@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

People don't have a jar of new and used miscellaneous metal sealing
rings they saved up over the years ?

that's where I get one when I need a new or different one.
There must be a few hundred in my qt size jar.
Somehow there is always the right one in there when I need one.

On 10/2/2012 6:34 PM, James Felder wrote:
> Bbbbbuuutttt.... You could get brand new ones for less than a dollar. You would stop the leak, PLUS you would not have to learn Ars Metallica.
>
> Jim
>
>
>
> On Oct 2, 2012, at 8:10 PM, Alistair Bell <albell@SHAW.CA> wrote:
>
>> i'd agree that you could anneal to regain softness of washer but disagree, Ed, in your annealing method for aluminum and copper. Both those metals anneal by quenching, not slow cool.
>>
>> alistair
>>
>>
>>
>>
>> On 2012-10-02, at 2:46 PM, Ed wrote:
>>
>>> The sealing washers are probably work hardened and are no longer soft enough
>>> to make a good seal.  Replace them as they are ideally one use items.
>>> That's why you get a new one for the oil plug when you buy an oil filter.
>>> In an emergency you can remove the sealing washers and heat them with a
>>> propane torch, allowing them to cool without quenching.  This will restore
>>> the softness of both aluminum and copper sealing washers and allow them to
>>> seal without excessive force.
>>>
>>> Ed
>>>
>>>
>>> On Tue, 2 Oct 2012 16:02:38 -0500, JRodgers <jrodgers113@GMAIL.COM> wrote:
>>>
>>>> PS pump is leaking at the washer where the hollow bolt passes through
>>>> the banjo fitting on the pressure side. I made sure the bolt IS NOT
>>>> loose. So I need to do something. Any suggestions?
>>>>
>>>> Thanks,
>>>>
>>>> John