Date:         Sun, 14 Oct 2012 14:56:56 -0700
Reply-To:     mark drillock <mdrillock@COX.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mark drillock <mdrillock@COX.NET>
Subject:      Re: Overheated wire junction on 1.9
In-Reply-To:  <CAB2RwfiatoJJ-_2jLBFqH8ZFp3Qm9HhyNmkyObyWTa8ne=aRaA@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Not exactly, since early 2.1 used the same wiring to junction "21" as
1.9 did. Bentley 90.70 show early 2.1 wiring, then VW changed it to
split the charging wire off of "21" and then VW increased the size of
the charging wire for 88 on.

Mark

VW changed it during the 86 model run

neil n wrote:
>
>
> As was suggested to me by another lister, I see in Bentley that the
> 1.9 wiring to junction post "21", is different than the 2.1
>
>

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.