At 05:04 PM 10/16/2012, Marc Perdue wrote: >As long as we're talking electrical stuff, any ideas why only the right >side lights would blink when the hazards are turned on? According to 97.113, IFeverything works correctly on both sides when the turn signals are used, the problem can only be bad switch L section or no contact at the switch L terminal, track 118. Cycle the connnector and inspect the terminals, but odds are high it's internal. You can disassemble the switch if you're handy that way, may be able to clean it. Sometimes a failing switch works better if you operate it with a sharp snap. But the real answer is going to be a switch. Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.