There is only 1 wire coming from the stalk switch for both hi beams, and then it splits into 2 circuits at the fuse box to go to the wires to each bulb. It can't really be the switch or the wire causing only 1 hi beam to work. It has to be at the fuse box or past there. Naturally, someone could have wired something screwy. mark Cunegonde wrote: > Thank you again for specific circuit testing. > > The driver's side hi beam stays on when I let go of the stalk. The hi beam indicator works. These are why I didn't think the column stalk switch was internally malfunctioning. It's connections might be, and now that I have soecific wiring path suggestions, will get on it! > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.