..... the upper portion of the ~ 3.5" x 5" grill hole on upper LH of Westy fridge cabinet? Image of mockup. Fan may be installed there or at old Dometic exhaust opening on body: For grounding reasons, I *think *box needs to clear to stove/sink metal. (1/2" minimum?) I *think* the 110VAC wire can be secured to inside face of cabinet but I'm not certain. If it was run on inside of cubby hole space, I assume it would need to be covered by a race? Or use BX cable? My DC TruckFridge install requires the OEM AC outlet to be moved. I don't like the location of the AC outlet near floor. Normally, I only use the outlet for my space heater, which I put on the rear table. Thanks, Neil.
Neil n 65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp '88 Slate Blue Westy to be named. '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ Vanagon VAG Gas I4/VR Swap Google Group: http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.