Bryan, did you try replacing the end connectors that plug into the new socket? Many times these are rusted and need to be replaced as well. If you did, then check the ground wire with an ohm meter to see if it is actually providing a ground path. -- Thanks, Ken Wilford John 3:16 www.vanagain.com Phone: 856-327-4936 Fax: 856-327-2242
On 10/18/2012 10:16 AM, Bryan Feddish wrote: > I have an issue with the right side blinker blinking really fast. At first, the front bulb was out. OK, I go to replace it and socket falls apart. I replace the socket and the bulb. Now both front and back blink but really fast. I checked the ground in both front and back. The ground wires are grounded to the vehicle. What I did notice is that when I disconnect the ground the lights still do the same thing. > > Thoughts? > > Thanks, > Bryan > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2013.0.2741 / Virus Database: 2614/5839 - Release Date: 10/18/12 > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.