Date:         Sat, 20 Oct 2012 11:20:19 -0400
Reply-To:     ed donnen <spliced.surprise@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         ed donnen <spliced.surprise@GMAIL.COM>
Subject:      panel rust
Content-Type: text/plain; charset=ISO-8859-1

So here I am again, waging the inevitable war with the rust demons.  I have
a question.  My door panels all have a drip corner to let moisture out.  My
wall panel behind the driver has seam rust and a rusted section that goes
into the rocker panel.  The question is, "Should there be an opening
between the wall and the rocker panel?"  Would I be wise to make an opening
from the bottom of the wall to outside the DoKa? I have already
accomplished that with the seam rust.
ed-91 Doka, maybe needing a water outlet.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.