John is correct about the wiring, and that's why I didn't recall making any changes. I already had made the wiring changes when I put the Eurospec headlights in. I did have to fit the pigtails in for the high beams connectors.
On Oct 25, 2012, at 9:29 PM, Kim Brennan wrote: > I don't recall making any cuts to install the SA lights. There are days I really like the SA lights, there are other times I really like the rectangular ones. But I would advise, if you are going to the DOT rectangular lights, don't do it. The lighting pattern is very poor compared to the round headlights (such as used in the SA grille.) If you have the eurospec rectangular (as I do), then no problem. > > On Oct 25, 2012, at 7:48 PM, David Vickery wrote: > >> I want to pull some SA lights off a van and replace with original 86-91 style ones (I want to keep the SA ones when I sell the van). I didn't install them, so no sure if anything was cut or otherwise done that makes it a pain to go backwards. In a normal install is anything cut or thrown away that that I will need? Any advice is much appreciated. Thanks, Dave |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.