yes, for sure the expandable sleeving is the better product, nice range of colours and the durability probably better than the rope hack. But the rope was just hanging around and I thought I'd see if it would do the job. Some heat shrink tubing at the ends finishes it of nicely.
alistair
On 2012-10-26, at 6:57 AM, Harold Teer wrote:
> How about using speaker wire expandable sleeving to protect and dress up wiring? It comes in many sizes and colors and is abrasion and chemical resistant and it works for automotive applications. I have used it for home audio and it is easy to work with and tough.
>
> See: http://www.parts-express.com/term/expandable-sleeving?srch=expandable+sleeving
>
> Harold
>
>
> On Thu, Oct 25, 2012 at 11:35 PM, Alistair Bell <albell@shaw.ca> wrote:
> speaking of conduit, you ever tried running insulated wire through "de cored" braided rope to give that cloth covered retro wire look?
>
> I'm fooling around with this, got some cheap braided rope with easily removable core. Looks pretty good when you slip the de-cored rope over your wires. Purely cosmetic, nice when wire runs are visible.
>
> alistair
>
>
> On 2012-10-25, at 5:51 PM, neil n wrote:
>
> > Nah. Second time. ;^)
> >
> > Ran a secured piece of EMT in rear cubby below table on my '81 Westy
> > to protect a + wire I ran through there then up behind rear cabinet to
> > a 12V outlet in spice rack. In hindsight maybe running it along
> > surface of pillar and covered it with a race if I was going to those
> > lengths.
> >
> > I get what you're saying. And, the + wire running from dash to kitchen
> > appliances runs under the carpet and it's been fine, though AFAIK, it
> > would see less of a load with only OEM Westy appliances using it.
> >
> > Neil.
> >
> > On Thu, Oct 25, 2012 at 2:33 AM, David Beierl <dbeierl@attglobal.net> wrote:
> >
> >> At 10:56 PM 10/24/2012, neil n wrote:
> >>>
> >>> Should I run them in conduit or is that overkill? (thinking of heat
> >>> generated)
> >>
> >>
> >> Making a harness is good for neatness, bad for shedding heat. Conduit same
> >> but also gives physical protection.
> >>
> >> If you did use conduit I bet it would be the first time it was ever done in
> >> an automotive application.
> >
> >
> >
> >
> > --
> > Neil n
> >
> > 65 kb image Myford Ready For Assembly http://tinyurl.com/64sx4rp
> >
> > '88 Slate Blue Westy to be named.
> >
> > '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/
> >
> > Vanagon VAG Gas I4/VR Swap Google Group:
> >
> > http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
>
>
>
> --
> __________
> Harold Teer
> 1991 Westy
> Harrisonburg, VA
>
>
|