Date:         Mon, 22 Oct 2012 12:01:41 -0500
Reply-To:     mcneely4@COX.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dave Mcneely <mcneely4@COX.NET>
Subject:      Re: Firewall fuel fitting
Comments: To: Rocket J Squirrel <camping.elliott@GMAIL.COM>
In-Reply-To:  <50856A28.9080406@gmail.com>
Content-Type: text/plain; charset=utf-8

Jack, the grommet is available from GoWesty, and I think from Bus Depot.  GoWesty includes it as a part of the fuel line replacement kit, also.  It is pretty simple.  You just use a length of fuel hose long enough to reach to the proper place on the fuel distribution system on the engine.  Fit the grommet into the firewall opening where the current plastic fitting is, and pass the hose through it, attaching it at both ends as appropriate, with good clamps.  I think I did buy mine from Bus Depot, but it has been a while, and I replaced all the fuel hoses at the same time, so it may have come as part of the kit.

mcneely

---- Rocket J Squirrel <camping.elliott@GMAIL.COM> wrote:
> Huh. I was mistaken that my van's firewall fuel line fitting was metal.
> It's not, it's plastic.
>
> The metal versions are around $40, pretty spendy for such a simple thing.
>
> I read that it can be replaced by simply passing the hose through the
> firewall, no fitting required. But I have Googled and searched the
> Webbernet and pored through a whole bunch of older posting in the
> archives and didn't find a simple "here's the parts you'll need" + how-to.
>
> Can someone point me in the right direction?
>
> --
> Jack "Rocket j Squirrel" Elliott
> 1984 Westfalia, auto trans,
> Bend, Ore.

--
David McNeely