Date:         Thu, 25 Oct 2012 21:00:41 -0500
Reply-To:     JRodgers <jrodgers113@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         JRodgers <jrodgers113@GMAIL.COM>
Subject:      Re: Uninstalling SA headlights
Comments: To: David Vickery <david_vickery@YAHOO.COM>
In-Reply-To:  <1351208912.63257.YahooMailClassic@web121506.mail.ne1.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

When I installed my SA lights I replaced the plug that fits to the
lights and about 8 to 10 inches of the wiring from the plug back.
Van-cafe, and I think Bus Depot sell this pigtail with the higher
quality/higher temp plug on the end. Well worth changing over.

Also - I have two 88 GL's. One now has the SA grille and lights, and the
other had the standard US DOT lights. The SA Eurospec lighting is so
superior that I plan to upgrade the second vehicle with the SA Grille
and lights as well.

John

On 10/25/2012 6:48 PM, David Vickery wrote:
> I want to pull some SA lights off a van and replace with original 86-91 style ones (I want to keep the SA ones when I sell the van).  I didn't install them, so no sure if anything was cut or otherwise done that makes it a pain to go backwards.  In a normal install is anything cut or thrown away that that I will need?   Any advice is much appreciated. Thanks, Dave
>