Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2012, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 28 Oct 2012 10:29:26 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: A/C tranny in my na diesel!
Comments: To: ralph meyermann <ralphmeyermann@GMAIL.COM>
In-Reply-To:  <CAAj276y3U=5_Fg+tKJF7CCuc-5D6aT7R8w0isbQxoTw1zV=TKQ@mail.gmail.com>
Content-Type: text/plain; charset="US-ASCII"

Yes slowing down the engine means less power. It was geared the way it was for a number of reasons. You just need to spend more time in third to compensate. Not only are you making less power but you are increasing stress on the engine. Unlike a real truck engine it really is not designed to be continuously lugged. The increased torque requirement means higher stress and cylinder pressures which increase heat and NOx emissions. I would invest in the later-turbo diesel engine for the increased power and strength. The pistons and crank are not the only differences.

Dennis

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of ralph meyermann Sent: Saturday, October 27, 2012 8:38 PM To: vanagon@GERRY.VANAGON.COM Subject: A/C tranny in my na diesel!

Hi Volks!! Took my first trip with the air cooled tranny in Velma and loving the rpm change at 60-65mph. With a slight tail wind we squeezed out approximately 31.4 mpg on mostly river grade!! Now the downer, now we need more power!! The hills are slow going and a head wind we can maintain. I found a turbo kit for about$ 500.00 which includes turbo,down pipe,intake and exhaust manifolds but would have to get a turbo vanny intake manifold that I've seen for$ 60.00. The problem would be finding the forged crank and installing piston oilers. Im thinking I could do a full rebuild into a turbo motor for about the same $ as a used AAZ motor! Will a 1z ahu tdi head match up to my 1.6 ?? Thinking more efficient being direct injected and better flow from head and camshaft profile?? Decisions decisions!! Thanks for any info!! Velma 82diesel 1.6 na westy


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.