Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2012, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 3 Nov 2012 11:24:04 -0700
Reply-To:     Zeitgeist <gruengeist@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Zeitgeist <gruengeist@GMAIL.COM>
Subject:      Re: Soo- Oil Pan cracked
In-Reply-To:  <6822266305022333520@unknownmsgid>
Content-Type: text/plain; charset=ISO-8859-1

Cast aluminum is not only structurally weak, but it's also somewhat porous and can allow fluids to wick through from the inside out. I'm currently collecting the parts for an mTDI swap and plan to coat the interior of my oil pan with a product called Glyptal<http://www.eastwood.com/glyptal-red-brush-on-1-qt.html>, which should eliminate the seeping issue for good.

On Sat, Nov 3, 2012 at 10:41 AM, Dana Mueller <dmueller@wack.com> wrote:

> So the big question: is the oil pan gasket manufactured anymore? If not, > are you all buying gasket material and xacto knifing your own? > > -dm > > On Nov 2, 2012, at 18:38, Frank Lee <techedteacher@gmail.com> wrote: > > Wow, Very rare I think. > > Last fall I had my 1.6 na leaky oil pan heli-arc welded and filed back into > shape. (i think.. such welding is way above my pay grade) > It worked. Pan does not leak. > > Another option. ~~ Ask on Samba. WANTED Classified. Look for someone who > has upgraded 82' diesel to a 1.9 TDI. May have the prior 1.6 NA. > > Frank > > > > On Fri, Nov 2, 2012 at 8:43 PM, Dana Mueller <dmueller@wack.com> wrote: > > > Thanks for the oil suggestions. Went to wipe down the drain plug area > > and clean off the pan when I noticed spot weld or whatever you call > > that stuff you can put on and it hardens. The only problem is when > > putting the drain plug pack in, that weakened and now I have one hell > > of a niagra falls happening. > > > > Backstory, purchased the vehicle and had it shipped from SC to WA > > because the westie was in good shape. Got it from some friends and > > reviewed the maintenance records, including calling the shop that > > rebuilt the engine. No one mentioned the cracked plan near the drain > > plug. > > > > This leads to my question-anyone have an oil pan for a 1982 VW diesel > 1.6? > > > > -dm > > >

-- Casey


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.