Date:         Wed, 7 Nov 2012 07:54:11 -0800
Reply-To:     Alistair Bell <albell@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@SHAW.CA>
Subject:      Re: Adding a front passenger dome light
Comments: To: Kenneth Lewis <kdlewis@NORTHSTATE.NET>
In-Reply-To:  <3476.162.58.82.136.1352298257.squirrel@webmail.northstate.net>
Content-Type: text/plain; charset=us-ascii

if it is a passenger van - others have described the situation.

if a westy, then you have to pull and cut a hole in the plywood headliner and fit the thin metal "hole surround" that the dome light clips onto.

alistair
 
On 2012-11-07, at 6:24 AM, Kenneth Lewis wrote:

> Is this possible? If so, how difficult?  Is there an existing hole that
> has been covered at the factory?
> 
> Thanks,
> Ken

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.