Date:         Wed, 7 Nov 2012 14:14:31 -0800
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: Transmission input shaft play?
Comments: To: neil n <musomuso@GMAIL.COM>
In-Reply-To:  <CAB2RwfjNF+uW_0a=801UoNLS_qkwMi4gbkDU6s9GmOVyi1Ae2g@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I see .
if that's what he wrote , then you are correct, could be either.
Is the poster's issue resolved yet ?


On 11/7/2012 11:08 AM, neil n wrote:
> actually he said:
>
> "1/8" to 1/4" of play at the end of the input shaft."
>
> This could mean either side or end play ?        ;^)
>
>
> Neil.
>
>
>
> On Wed, Nov 7, 2012 at 12:01 AM, Scott Daniel - Turbovans
> <scottdaniel@turbovans.com> wrote:
>
>> Hhe says 'end play.'
>>
>> right now my thinking is it could be related to the splined junction ..
>> like the 2 shafts are not screwed well together..
>>    .......or perhaps main shaft bearing loose in the case.
>>
>> if it's 1/4 inch I'd say that's not right.
>
>
>> On 11/6/2012 10:40 PM, neil n wrote:
>>
>> If you're talking about side to side play, that's normal.
>>
>> The input shaft is held onto another shaft (can't recall part name)
>> with a small stud. There is a gear/sleeve that slides over both,   .....
>> Some images of what I mean (this is an air cooled, but same idea):
>>
>> https://picasaweb.google.com/musomuso/InputShaftRRDKAirCooledTransmission#
>
>
> --
> Neil n
>
> 65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp
>
> '88 Slate Blue Westy to be named.
>
> '81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/
>
> Vanagon VAG Gas I4/VR Swap Google Group:
>
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
>