Date: Thu, 1 Nov 2012 23:15:06 -0700
Reply-To: Jeff <vw.doka@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jeff <vw.doka@GMAIL.COM>
Subject: Re: Looking for spark plug wire recommendations
In-Reply-To: <CAPDG_XJaRUbsxzLFY9YBVg0F2XAXn9wJp6k5csTN_OdEj7LqwA@mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"
When it comes to parts... OE (Original Equipment) and OEM (Original
Equipment Manufacturer) are two completely different animals.
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Hector Zapata
Sent: Thursday, November 01, 2012 4:42 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Looking for spark plug wire recommendations
Many OEM ignition parts were made by Beru, not Bosch, and I believe those
are still German made.
On Thu, Nov 1, 2012 at 7:32 PM, David Clarkson <dvdclarksn@aol.com> wrote:
> Thanks Harold that's probably the way that I'll go. What is
> interesting is that the same picture appears to be used for the other
> option at the bottom of that page (Bosch set). I know that Bosch made
> most of the electrical and particularly ignition components for our
> vehicles. Bosch is absolutely not the same company that it was 25
> years ago due to outsourcing for cheaper labor and materials but then
> again what company hasn't done this in the last 25 years? I do believe
> that real OEM is the way to go. I had to replace my power steering
> pump after over 250,000 trouble -free miles and for economic reasons,
> that I now truly regret, and went to a local FLAPS. I won't name this
> hometown auto parts giant but will say that their name is the opposite
> of "regress". Long story short; after replacing the pump six times in
> a year and a half I had a 30 minute conversation with the manager and
> finally convinced him to give me my money back rather than another
> crappy pump POS (oops I mean PS) pump. I worked in the service
> department at my local Honda dealership and kept swapping them out
> under the best of conditions but needed him to know that my time was
> worth something as was my frustration level. I told him that the last
> pump threw out the shaft and kicked off the belt that got tangled and
> mangled the alternator belt and also disabled the water pump. I took
> my money that he returned to me and went to the parts yard that had a
> 91 vanagon that I had been scavenging parts off of and bought it's
> used pump with over 100k and installed it. It has now taken me over
> 50k and runs very quietly and contentedly. All I buy from most FLAPS
> with the exception of NAPA and one local import parts house is fluids.
> I just don't trust them for anything that is electrical or has moving
> parts. Thanks to everyone who replied for their input. I did by the way
check for corrosion and found no green or white junk on the connections but
will use di-electric grease when I install the new set. Good idea Scott.
>
>
>
>
>
>
> -----Original Message-----
> From: Harold Teer <teer.vanagon@gmail.com>
> To: David Clarkson <dvdclarksn@aol.com>
> Cc: list <vanagon@gerry.vanagon.com>
> Sent: Thu, Nov 1, 2012 2:16 pm
> Subject: Re: Looking for spark plug wire recommendations
>
> On Thu, Nov 1, 2012 at 2:46 PM, David Clarkson
> <dvdclarksn@aol.com>
> wrote:
> ?Hey listees, I am in need of a new set of spark plug and coil wires
> for my 1990 2.1 engine.
> How about these for genuine VW wires at $64.95?
> http://www.busdepot.com/025998031
>
> Harold
>
>
> __________
> Harold Teer
> 1991 Westy
> Harrisonburg, VA
>
>
>
>
>
>
>
|